I believe that everyone will see a lot of equipment such as automatic assembly lines in many places, and also know that this equipment has a great role in ordinary industrial production. Maybe everyone knows that there are some appearances. Let's take a look at the structure and appearance of the automatic assembly line.
The following points are some information about the structure and appearance of the automatic assembly line:
1. Sheet metal parts are all machine formed, and the surface should be flat.
2. Edges, welds, ends, etc. of machined parts must be polished smooth and flat, and no burrs should appear.
3. The overall design of the complete assembly line and line equipment should be strong and beautiful in structure. Except for the purchase of standard parts, sheet metal parts, aluminum alloys, and non-metallic parts such as plexiglass, all coverings and structural parts should be surface anti-corrosion treated; all surfaces must be uniform in color and flat.
4. The split aluminum profile is used as the guide rail, and the assembly wire support is aluminum profile.
5. The appearance of each wire body, equipment, and facility is beautiful, and the overall color is coordinated; aluminum alloy profiles should be used as much as possible, and the surface of the steel should be anti-corrosive treatment such as dusting, baking, plating, etc .; the surface of the transmission parts should be treated with oxidation protection.
6. The main transmission parts (shaft, sprocket, chain, guide wheel, guide rail, etc.) should be properly heat treated to ensure service life.
7. The surface treatment of parts should adopt electroplating, plastic spraying, baking paint and other processes as required.
8. Adjustment measures should be taken when the line body and equipment are installed. The line body and equipment should be installed horizontally and vertically and arranged neatly. |
Record: ICP.17021542
